無線機器の型式認証，ホモロゲーション，認証サービス - グローバル市場へのアクセス
We can offer you reliably all services concerning Type Approval in Monaco (Monaco). Our distinguished contact with the authority in Monaco (Monaco), 信頼関係 Direction des Plateformes et des Ressources Numériques (NIC), as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Monaco trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
- Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
- Provide pre-compliance testing during the design and development phase to determine compliance
- Assist in completion of applications and other required forms
- Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
- Handle entire submittal process including working with local testing and certification organizations
- Arrange for initial factory inspections that are required before certification issuance
- Coordinate verification testing on qualified products as needed
- Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
- Support renewal maintenance of certificates as needed
- User manual translation service when needed
For Monaco we can offer you a short termed tentative offer based upon a submitted Datasheet of the device:
GEO / MAP から Monaco
French (official), English, Italian, Mon
Certificate Example for Monaco
Direction des Plateformes et des Ressources Numériques (NIC)
(24GHz, 77GHz, 79GHz, UWB)
(315MHz, 433MHz, 868MHz)
(125kHz, 315MHz, 433MHz, 868MHz)
(Tank Level, Positions-Radar)
(315MHz, 433MHz, 868MHz)
(125kHz, 13,56MHz, 868MHz)
(24GHz, 60GHz, 79GHz)
Safety Information for Monaco
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type D electrical plug has three large round pins in a triangular pattern. Type M plugs are often used alongside Type D plugs for larger appliances and as a result, some sockets work with both Type D and Type M plugs. Type D plugs are rated 5 amps.
The Type E electrical plug has two 4.8 mm round pins spaced 19 mm apart and a hole for the socket’s male grounding pin. The Type E socket is different to the Type F socket which is standard in other continental European countries, such as Germany. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type E plugs are rated 16 amps.
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.