世界中のホモロゲーション
型式認証のエキスパート


デンマーク

無線機器の型式認証,ホモロゲーション,認証サービス - グローバル市場へのアクセス

We can offer you reliably all services concerning Type Approval in Denmark (Copenhagen). Our distinguished contact with the authority in Denmark (Copenhagen), 信頼関係 National Agency of Telecommunication, as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Denmark trouble-free and cost-effective.

We will assist you to put your product successfully on the market by offering the following services:

  • Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
  • Provide pre-compliance testing during the design and development phase to determine compliance
  • Assist in completion of applications and other required forms
  • Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
  • Handle entire submittal process including working with local testing and certification organizations
  • Arrange for initial factory inspections that are required before certification issuance
  • Coordinate verification testing on qualified products as needed
  • Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
  • Support renewal maintenance of certificates as needed
  • User manual translation service when needed


For Denmark we can offer you a short termed tentative offer based upon a submitted Datasheet of the device:
quote@ib-lenhardt.de



GEO / MAP から Denmark


一般的な情報 Denmark

正式名称:
Denmark


キャピタル
Copenhagen


大陸
Europe


緯度度
55.89847700075279


経度
10.980297701806636


カレンシー
Danish Krone


国コード
+ 45


トップレベルドメイン
.dk


言語
Danish, Faeroese, Greenlandic (an Inuit dialect), German speaking minority


サイズ(平方キロメートルで)
43,094.0 km²


人口(2011年現在)
5574000 Einwohner


国連に参加する日
24.10.1945


ISO3166-2によると国コード
DK


ISO3166-3によると国コード
DNK


Certificate Example for Denmark


Download Certificate
 / 



必須/任意
必須

当局/規制機関
National Agency of Telecommunication

認証書の有効期間
無制限

現地代表者は必要ですか?
No

現地試験は必要ですか?
No

無線型式認証の平均リードタイム
0 weeks

ラベル例 Denmark

Example Radio Type Approval Label for Denmark
Download Label
PDF / PNG



認定ロゴやナンバーのマーキング必須?
Yes

サイズ
5 mm

特定のユーザーマニュアルの要件?
Yes

製品の範囲

Automotive

Radar
(24GHz, 77GHz, 79GHz, UWB)

Funkschlüssel
(315MHz, 433MHz, 868MHz)

Keyless Go
(125kHz, 13,56MHz)

Reifendrucksensoren
(125kHz, 315MHz, 433MHz, 868MHz)

Entertainment
(2,4GHz)

Industrie

Radar
(Tank Level, Positions-Radar)

Wireless-M-Bus
(315MHz, 433MHz, 868MHz)

Wireless-CAN-Bus
 

RFID
(125kHz, 13,56MHz, 868MHz)

UWB Devices
(24GHz, 60GHz, 79GHz)

Consumer Elektronik

WirelessHD
(60GHz)

WLAN
(2,4GHz, 3GHz, 5GHz, 10GHz)

Bluetooth
(2,4GHz)

Zigbee
(868MHz, 2,4GHz)

Safety Information for Denmark

Type C Plug
Type C Sock Type C Plug Type C Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
Type F Plug
Type F Sock Type F Plug Type F Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.
Type E Plug
Type E Sock Type E Plug Type E Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type E electrical plug has two 4.8 mm round pins spaced 19 mm apart and a hole for the socket’s male grounding pin. The Type E socket is different to the Type F socket which is standard in other continental European countries, such as Germany. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type E plugs are rated 16 amps.
Type K Plug
Type K Sock Type K Plug Type K Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type K plug has two round pins as well as a grounding pin. It is similar to Type F, the difference being that Type F has grounding clips instead of a grounding pin. Type C plugs are perfectly compatible with Type F sockets. Type E plugs and sockets are also used in Denmark.
This website only uses the most necessary cookies to enhance your browsing experience. Please accept the use of cookies on this site, to allow us improving the site for you. You will find more information about cookies in the Privacy Statement