Due to the update in Moldavian regulations, the Moldavian recognised certification body will review and update all valid certificates, in case any need for further documents during this process the CB might contact the certificate holder directly.
The certificate holder is free to issue a DoC according to module A of the TR 34/2019, in this case the validity of the CoC will be cancelled.
Source: Internal source by IBLAG, communication with CB
New marking regulation
According to the new regulation TR34/2019, which will come into force on February 22nd, 2021, the application of both CE and SM mark on the same product is not permitted anymore.
The manufacturers can decide to apply either the SM mark or the CE mark only on their products. Please note that there is no transitional period specified in the regulation. The authority recommends that all manufacturers, who already have received Moldavian certificates, start to remove the SM mark if the radio equipment is already labelled with the CE mark.
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.
Type Approval Expert Moldova お問合わせください。