Worldwide Homologation
Type Approval Specialists
Click here to check our Live Map for the global COVID-19 impact on authorities and type approval processes. IB-Lenhardt AG is fully operational and available for you.


Algeria

Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions

We can offer you reliably all services concerning Type Approval in Algeria (Algiers). Our distinguished contact with the authority in Algeria (Algiers), our good relationship to Autorité de Régulation de la Poste et des Télécommunications / Agence Nationale des Fréquences(ANF) as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Algeria trouble-free and cost-effective.

We will assist you to put your product successfully on the market by offering the following services:

  • Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
  • Provide pre-compliance testing during the design and development phase to determine compliance
  • Assist in completion of applications and other required forms
  • Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
  • Handle entire submittal process including working with local testing and certification organizations
  • Arrange for initial factory inspections that are required before certification issuance
  • Coordinate verification testing on qualified products as needed
  • Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
  • Support renewal maintenance of certificates as needed
  • User manual translation service when needed


For Algeria we can offer you a short termed tentative offer based upon a submitted Datasheet of the device:
quote@ib-lenhardt.de



GEO / MAP of Algeria


General information about Algeria

Formal Name
Algeria


Capital
Algiers


Continent
Africa


Degree of latitude
28.02922804009597


Degree of longitude
2.4365983234863506


Currency
Algerian Dinar


Country code
+ 213


Top-level domain
.dz


Languages
Arabic (official), French, Berber dialects


Size (in km²)
2,381,740.0 km²


Population (as of 2011)
35980193 Einwohner


Date of joining the UN
08.10.1962


Country code according to ISO 3166-2
DZ


Country code according to ISO 3166-3
DZA


Certificate Example for Algeria

Example Radio Type Approval Certificate for Algeria
Download Certificate
PDF / JPG



Mandatory / Voluntary
Mandatory

Authority / Regulatory Body
Autorité de Régulation de la Poste et des Télécommunications / Agence Nationale des Fréquences(ANF)

Validity Period of Certification
24 Month/s


Local Representative Required?
Yes

In-Country Testing Required?
Yes

Average lead time for radio type approval
10 weeks


News for Algeria


  • New type approval procuedure in force

    On 17th of October Algerian's Authority AUTORITÉ DE RÉGULATION DE LA POSTES ET DES COMMUNICATIONS ÉLÉCTRONIQUES (ARPCE) has published the new procedure for type approval under "Decision N°28/SP/PC/ARPECE/2019 du 16/10/2019".

    Here is a short overview of important points to be aware of:

    • The validity of all certificates is 3 years from now on
    • Submitted test reports should not be older than 3 years / same applies tp declarations from manufactuerers as well
    • SAR tests are mandatory
    • The deadline of the evaluation for any application won't exceed two months

    Here the link to the official decision


  • ARPT turns into ARPCE

  • Algeria reassigns regulatory competence to ANF

    On 2018-05-13, the Algerian Republic published an updated Law in the JOURNAL OFFICIEL DE LA REPUBLIQUE ALGERIENNE N°27. This Law n° 18-04 is transferring the regulatory authority power from the Autorité de Régulation (ARTP) to the Agence Nationale des Fréquences (ANF) for SRD products. The procedure details are still under discussion.

    Thus the ARTP confirmed to IB-Lenhardt that it will remain the competent body for homologating equipments which can be directly or indirectly connected to a public network. Such equipment will still require a Certificate of Conformity.

    Source:

    http://www.arpt.dz/fr/doc/reg/loi/Loi18-04.pdf


  • Type Approval Suspended

    ARPT (Autorité de Régulation de la Poste et des Télécommunications) recently informed that Type Approval services are on hold due to the current election of a new Director. Consequently, there will be no new Type Approval certificates issued in the meantime. 

    Normal services are expected to resume after the election of the new Director.



Product scope

Automotive

Radar
(24GHz, 77GHz, 79GHz, UWB)

Funkschlüssel
(315MHz, 433MHz, 868MHz)

Keyless Go
(125kHz, 13,56MHz)

Reifendrucksensoren
(125kHz, 315MHz, 433MHz, 868MHz)

Entertainment
(2,4GHz)

Industrie

Radar
(Tank Level, Positions-Radar)

Wireless-M-Bus
(315MHz, 433MHz, 868MHz)

Wireless-CAN-Bus
 

RFID
(125kHz, 13,56MHz, 868MHz)

UWB Devices
(24GHz, 60GHz, 79GHz)

Consumer Elektronik

WirelessHD
(60GHz)

WLAN
(2,4GHz, 3GHz, 5GHz, 10GHz)

Bluetooth
(2,4GHz)

Zigbee
(868MHz, 2,4GHz)

Safety Information for Algeria

Type C Plug
Type C Sock Type C Plug Type C Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
Type F Plug
Type F Sock Type F Plug Type F Sock
Netzspannung
230V

Netzfrequenz
50Hz
Description
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.

Contact

Pascale Müller
Type Approval Expert Algeria
Contact me now!
Rasin Katta
Type Approval Expert Algeria
Contact me now!
This website only uses the most necessary cookies to enhance your browsing experience. Please accept the use of cookies on this site, to allow us improving the site for you. You will find more information about cookies in the Privacy Statement