Liberia
Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Liberia (Monrovia). Our distinguished contact with the authority in Liberia (Monrovia), our good relationship to Liberia Telecommunications Authority(LTA) as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Liberia trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
- Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
- Provide pre-compliance testing during the design and development phase to determine compliance
- Assist in completion of applications and other required forms
- Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
- Handle entire submittal process including working with local testing and certification organizations
- Arrange for initial factory inspections that are required before certification issuance
- Coordinate verification testing on qualified products as needed
- Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
- Support renewal maintenance of certificates as needed
- User manual translation service when needed
For Liberia we can offer you a short termed tentative offer based upon a submitted Datasheet of the device:
quote@ib-lenhardt.de
GEO / MAP of Liberia
General information about Liberia
Liberia
Capital
Monrovia
Continent
Africa
Degree of latitude
6.268013072931834
Degree of longitude
-9.816973537597615
Liberian Dollar
Country code
+ 231
Top-level domain
.lr
Languages
English (official) and tribal dialects
Size (in km²)
111,370.0 km²
Population (as of 2011)
4128572 Einwohner
02.11.1945
Country code according to ISO 3166-2
LR
Country code according to ISO 3166-3
LBR
Certificate Example for Liberia
Mandatory
Authority / Regulatory Body
Validity Period of Certification
unlimited
No
In-Country Testing Required?
No
Average lead time for radio type approval
6 weeks
Product scope
Automotive
Radar
(24GHz, 77GHz, 79GHz, UWB)
Funkschlüssel
(315MHz, 433MHz, 868MHz)
Keyless Go
(125kHz, 13,56MHz)
Reifendrucksensoren
(125kHz, 315MHz, 433MHz, 868MHz)
Entertainment
(2,4GHz)
Industrie
Radar
(Tank Level, Positions-Radar)
Wireless-M-Bus
(315MHz, 433MHz, 868MHz)
Wireless-CAN-Bus
RFID
(125kHz, 13,56MHz, 868MHz)
UWB Devices
(24GHz, 60GHz, 79GHz)
Consumer Elektronik
WirelessHD
(60GHz)
WLAN
(2,4GHz, 3GHz, 5GHz, 10GHz)
Bluetooth
(2,4GHz)
Zigbee
(868MHz, 2,4GHz)
Safety Information for Liberia
120, 220V
Netzfrequenz
50, 60Hz
The Type A electrical plug (or flat blade attachment plug) is an ungrounded plug with two flat parallel pins. Although the American and Japanese plugs appear identical, the neutral pin on the American plug is wider than the live pin, whereas on the Japanese plug both pins are the same size. As a result, Japanese plugs can be used in the US but often not the other way around. The pins on Type A and Type B plugs have a hole near the tip that fits into ‘bumps’ found on the contact wipers of some sockets, so that the pins are gripped more tightly allowing for better contact and also to prevent the plug from slipping out of the socket. Some sockets have spring-action blades that grip the sides of the pins, making the holes obsolete.
120, 220V
Netzfrequenz
50, 60Hz
The Type B electrical plug has two flat parallel pins and a round grounding (or earth) pin. The earth pin is longer than the other two so that the device is grounded before the power is connected. As with the type A plugs, the American and Japanese versions vary slightly. Type B plugs are rated at 15 amps.
120, 220V
Netzfrequenz
50, 60Hz
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
120, 220V
Netzfrequenz
50, 60Hz
The Type E electrical plug has two 4.8 mm round pins spaced 19 mm apart and a hole for the socket’s male grounding pin. The Type E socket is different to the Type F socket which is standard in other continental European countries, such as Germany. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type E plugs are rated 16 amps.
120, 220V
Netzfrequenz
50, 60Hz
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.