Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably our Type Approval services in Syria. Our distinguished contact with the authority, as well as our qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will make way for your trouble-free and cost-effective market access in Syria.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Completion of applications and other required forms
Handle entire submittal process including working with local certification organizations
Coordinate verification testing on certified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as required
We can offer you a short-termed tentative offer based on a Datasheet of the device: firstname.lastname@example.org
GEO / MAP of Syria
General information about Syria
Degree of latitude
Degree of longitude
Arabic (official), French and English widely understood
SY-TPRA requesting EN 62368 Safety Report (instead of EN 60950) starting 20 December 2020
The Syrian Telecommunications & Post Regulatory Authority will start to request Safety Test Reports according to EN 62368-1 from 20 December 2020 onwards, when Type Approval is requested.
They will no longer accept EN 60950 reports. Previously approved devices are not affected by this requirement.
Source: local partner
Council of Commissioners Resolution 2020/3/14
Regulation of Short-Range Devices approved by Council of Commissioniers Resolution 2020/3/14
The use and operation of short-range devices within the permissible frequencies or bands and the levels of emission power are permitted as listed in the Article 4 (see source).
For these devices type approval is required (application for a spectrum license).
The kind of devices covers Non-Specific Short Range Devices, Inductive Applications, Active Medical implants and their associated peripherals, Wideband Data Transmission Systems (like Bluetooth, WLAN etc.). Transport and Traffic Telematics, Rediodetermination Applications and Radio Microphone applications.
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type E electrical plug has two 4.8 mm round pins spaced 19 mm apart and a hole for the socket’s male grounding pin. The Type E socket is different to the Type F socket which is standard in other continental European countries, such as Germany. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type E plugs are rated 16 amps.
There are two variations of the Type L plug, one rated at 10 amps, and one at 16 amps. The 10 amp version has two round pins that are 4 mm think and spaced 5.5 mm apart, with a grounding pin in the middle. The 16 amp version has two round pins that are 5 mm thick, spaced 8mm apart, as well as a grounding pin. Italy has a kind of “universal” socket that comprises a “schuko” socket for C, E, F and L plugs and a “bipasso” socket for L and C plugs.