Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Mozambique (Maputo). Our distinguished contact with the authority in Mozambique (Maputo), our good relationship to Instituto Nacional das Comunicações de Moçambique (INCM), as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Mozambique trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For Mozambique we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: firstname.lastname@example.org
The Authority INCM in Mozambique (Instituto Nacional das Comunicações de Moçambique) was renamed into ARECOM (Autoridade Reguladora das Comunicações na República de Moçambique).
This change does not apply the Type Approval Procedure.
In the future, certificates will be issued by ARECOM but existing certificates made by INCM remain valid.
Source: internal research from 2nd of September 2019
New validity time for type approval certificates
According to decree 66/2018 as of 9th November 2019 under article 20, *Authority Instituto Nacional das Comunicações de Moçambique* (INCM) has released, that new approvals will have a validity period of 8 years.
Under article 21 was determined that certificate renewals should be requested 60 days prior to their expiring date.
On 2018-03-14, the INCM (National Institute of Communication of Mozambique) published a letter informing the manufacturers, importers and users of electrocommunication and telecommunication equipment that the import, use and commercialization of the following devices are prohibited in the country;
Devices operating in the frequency band 1900MHz- 2100MHz (reserved for cell phones)
Telecommunication equipment used for fraudulent purpose (such as SIM boxes)
Equipment representing a risk for the health or for terrestrial, maritime or aeronautical mobile services
Equipment without a Declaration for Import from the INCM
Equipment not homologated or certified by the INCM
Equipment which didn't undergo a technical evaluation from the INCM. Any not homologated equipment will be confiscated by the INCM.
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.
The Type M plug has three round pins in a triangular pattern and looks similar to the Indian Type D plug, but its pins are much larger. Type M plugs are sometimes used for bigger appliances in countries that make use of Type D plugs, as well as in Israel (Type H). Therefore, sockets in these countries sometimes work with Type M plugs.