Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Central African Republic (Bangui). Our distinguished contact with the authority in Central African Republic (Bangui), our good relationship to Autorité de Régulation des Communications Electroniques et de la Poste (ARCEP), as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Central African Republic trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For Central African Republic we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: email@example.com
GEO / MAP of Central African Republic
General information about Central African Republic
Central African Republic
Degree of latitude
Degree of longitude
CFA Franc BEAC
French (official), Sangho, Arabic, Hansa, Swahili
Average lead time for radio type approval
News for Central African Republic
All Type approval requests suspended
Due to internal reorganization of the regulatory authority „Agence de Régulation des Télécommunications (ART)", all type approval requests are currently on hold.
There was no official statement from the authority and we don't know long the process will take.
But our local partners will inform us when the authority resumes work
Source: internal research
New lead timesfor Type Approval
Due to internal reorganization of the Authority and the responsibilities, the Type Approval procedure work flow is delayed by additional one month.
Now the whole lead time takes approximate three months.
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type E electrical plug has two 4.8 mm round pins spaced 19 mm apart and a hole for the socket’s male grounding pin. The Type E socket is different to the Type F socket which is standard in other continental European countries, such as Germany. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type E plugs are rated 16 amps.