Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Nepal (Kathmandu). Our distinguished contact with the authority in Nepal (Kathmandu), our good relationship to Ministry of Information & Communications (MOIC), Nepal Telecommunications Authority (NTA), as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Nepal trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For Nepal we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: firstname.lastname@example.org
GEO / MAP of Nepal
General information about Nepal
Degree of latitude
Degree of longitude
Nepali (official), Newar, Maithali, Bhojpuri, Tharu, Tamang, and others
Validity Period of Certification
For many SRDs an exemption is possible
Local Representative Required?
In-Country Testing Required?
Average lead time for radio type approval
News for Nepal
Enforcement of Type Approval Certification
Nepal's NTA announced to monitor the market to enforce the certification of cell phones.
According to NTA this monitoring is to tackle the high ratio of 50% of handsets without certification. Customers will have to provide their handset's IMEI to obtain a SIM card to prevent the usage of of unregistered phones.
The Type Approval Certification itself will be improved and helped by consultants.
The Type C electrical plug (or Europlug) is a two-wire plug that has two round pins. It fits into any socket that accepts 4.0 – 4.8 mm round contacts on 19 mm centres. They are being replaced by E, F, J, K or N sockets which work perfectly with Type C plugs. Type C plugs are generally limited for use in appliances that require 2.5 amps or less.
The Type D electrical plug has three large round pins in a triangular pattern. Type M plugs are often used alongside Type D plugs for larger appliances and as a result, some sockets work with both Type D and Type M plugs. Type D plugs are rated 5 amps.
The Type M plug has three round pins in a triangular pattern and looks similar to the Indian Type D plug, but its pins are much larger. Type M plugs are sometimes used for bigger appliances in countries that make use of Type D plugs, as well as in Israel (Type H). Therefore, sockets in these countries sometimes work with Type M plugs.