Radio Type Approval, Homologation, Certification Services - Global Market Access Solutions
We can offer you reliably all services concerning Type Approval in Saudi Arabia (Riyadh). Our distinguished contact with the authority in Saudi Arabia (Riyadh), our good relationship to Communications and Information Technology Commission (CITC) as well as the qualification in the homologation of consumer and automotive RF-products and Short Range Devices (SRD) in ISM-Frequency band will create your market access in Saudi Arabia trouble-free and cost-effective.
We will assist you to put your product successfully on the market by offering the following services:
Identify applicable requirements for your specific product or technology feature to comply with current regulations in safety, EMC, wireless, etc.
Provide pre-compliance testing during the design and development phase to determine compliance
Assist in completion of applications and other required forms
Test in our accredited labs or your qualified facilities to issue CB Test Report and Certificate with applicable national differences and other test reports for wireless, etc.
Handle entire submittal process including working with local testing and certification organizations
Arrange for initial factory inspections that are required before certification issuance
Coordinate verification testing on qualified products as needed
Facilitate and expedite project progress with support of IB-Lenhardt AG local team and/or partner
Support renewal maintenance of certificates as needed
User manual translation service when needed
For Saudi Arabia we can offer you a short termed tentative offer based upon a submitted Datasheet of the device: quote@ib-lenhardt.de
Please be informed that CITC has announced an additional requirement as below with respect to 4G technology support in tracking devices and machine-to-machine communication (M2M)
Further to what was clarified previously, where we have emphasized that all importers of CITC devices in the Kingdom of Saudi Arabia must comply with the technical specification (RI056) issued by the Committee and which included that all terminal devices must - at minimum - support 4G and cellular transmission service in addition to applying the electronic label.
Based on that, the Committee would like to emphasize that these kind of devices must include the above-stated requirements. Otherwise such terminal devices will not be released or approved.
This requirement to support 4G technology in tracking devices and machine-to-machine communication (M2M) will come into force on 1/1/2020.
Source: CITC email.
New e-platform Saber
The Saudi Standards, Metrology and Quality Organization (SASO) has offically launched a new online platform called Saber to issue conformity assessment certificates and register products before entering the Saudi market.
Description
The Type A electrical plug (or flat blade attachment plug) is an ungrounded plug with two flat parallel pins. Although the American and Japanese plugs appear identical, the neutral pin on the American plug is wider than the live pin, whereas on the Japanese plug both pins are the same size. As a result, Japanese plugs can be used in the US but often not the other way around. The pins on Type A and Type B plugs have a hole near the tip that fits into ‘bumps’ found on the contact wipers of some sockets, so that the pins are gripped more tightly allowing for better contact and also to prevent the plug from slipping out of the socket. Some sockets have spring-action blades that grip the sides of the pins, making the holes obsolete.
Netzspannung
127, 220V
Netzfrequenz
60Hz
Description
The Type B electrical plug has two flat parallel pins and a round grounding (or earth) pin. The earth pin is longer than the other two so that the device is grounded before the power is connected. As with the type A plugs, the American and Japanese versions vary slightly. Type B plugs are rated at 15 amps.
Netzspannung
127, 220V
Netzfrequenz
60Hz
Description
The Type F electrical plug (also known as a Schuko plug) has two 4.8 mm round pins spaced 19 mm apart. It is similar to the Type E plug but has two earth clips on the side rather than a female earth contact. The CEE 7/7 plug was developed to work with sockets E and F and has grounding clips on both sides (to work with Type F sockets) and a female contact (to accept the grounding pin of the type E socket). Type F plugs are rated 16 amps.
Netzspannung
127, 220V
Netzfrequenz
60Hz
Description
The Type G electrical plug has three rectangular blades in a triangular pattern and has an incorporated fuse (usually a 3 amps fuse for smaller appliances such as a computer and a 13 amps one for heavy duty appliances such as heaters). British sockets have shutters on the live and neutral contacts so that foreign objects can’t be introduced into them.
Contact
Rasin Katta
Type Approval Expert Saudi Arabia Contact me now!
This website only uses the most necessary cookies to enhance your browsing experience. Please accept the use of cookies on this site, to allow us improving the site for you. You will find more information about cookies in the Privacy Statement